SPECIFICATION		300 mm	450 mm	600 mm	800 mm
MAIN DIMENSION:
Maximum Grinding between center	mm	300	450	600	800
Height center	mm	125	130	150	150
Maximum Grinding diameter	mm	220	230	270	270
TABLE:
Maximum swivelled sheel head	DEG	100	90	90	90
Maximum Swivelled towards operator	DEG	30	30	30	30
Mechanically reverse forward tabel feed per minute		150/300	150/300	150/300	150/300
At extra cost; Hydraulic tabel speed intinetly variable minimum		100	100	100	100
Maximum per minute (0.30, second dwell time at both end stroke)		5000	5000	5000	5000
WHEEL HEAD:
Grinding Wheel DxW/B	mm	300/25/127	354/40/127	354/40/127	354/40/127
Worn out diameter	mm	190	250	250	250
RPM of wheel spindel		2,100	1,910	1,910/2100	1,910/2100
Wheel head swivell for toperalungecut	deg	450/300	450/300	450/300	450/300
Maximum transverse movement	mm	150	200	250	250
Infeed revolution of hand wheel	mm	0.01	0.01	0.01	0.01
AT EXTRA COST:
Micro feeding of wheelhead hand lever rapid approach	mm	0.004	0.002	0.002	0.002
of wheelhead with dial and stopper.	mm	150	200	250	250
Hydraulic rapid approach of wheel head with turcite guideways and 01 hour timer adjustabel	mm	40	40	40	50
WORK HEAD:
Morse taper in spindel		MT 3	MT 3	MT 3	MT 3
Work head swivelled degree		90/30	90/30	90/30	90/30
Spindel RPM (Two Speed motor)	hp/RPM	80/150/270	80/150/270	60/120/212	60/120/212
	deg			380	380
EXTRA COST DC DRIVE MOTOR RPM.		10/800	10/800	10/800	10/800
TAILSTOCK:
Taper in spindel	mm	MT 3	MT 3	MT 4	MT 4
Barrel travel	mm	50	50	50	50
ELECTRIC MOTOR:
For wheel head		2, HP	3, HP	3, HP	3, HP
Work head		0.5, HP	0.5, HP	0.5, HP	0.5, HP
Mechanically reverse forward		0.5, HP	0.5, HP	0.5, HP	0.5, HP
Hydraulic power pack unit motor		1, HP	1, HP	1, HP	1, HP
Internal grinding attachment		0.5,HP/2880 RPM	0.5,HP/2800 RPM	0.5,HP/2800 RPM	1,HP/2880 RPM
Coolant Pump		0.15	0.15	0.15	0.15
Approximate weight		1290 kg.	1850 kg.	2400 kg.	2750 kg.
Length MM		1300	1600	2000	2200
WIDTH		1200	1400	1490	1490
HEIGHT		1440	1500	1500	1500